Contax 167MT Camera Review

The highlight of my year, every year and without fail, is my trip to the United Kingdom. My primary vocational pursuit is academic research, and each year my field’s premier conference convenes at New College, Oxford in a later week of March. Philosophers of education—a small but hearty subfield of philosophy—converge on the University from all over the world. Together, we present our papers, share full-course dinners in New College’s great hall, and enjoy pints in the basement pub at night. 

Just ahead of one year’s conference, as I was building on a newfound love for analog photography, I purchased the famed Carl Zeiss 50/1.7 Planar for the Contax/Yashica Mount. James wrote about the 1.4 version previously, but it’s said that the 1.7 is sharper and cheaper to boot. At the time, I was working as a public high school English teacher. My salary was modest relative to the cost of living in Boston and my wife was in school full time studying to become a veterinarian. Money was stretched. Up to then, I’d never purchased a single lens costing more than $75 U.S. Having heard the Zeiss mythology, I figured that a 50mm C/Y-mount lens was a surefire way to drink the Zeiss elixir for a good benefit-cost ratio. I think I ended up buying the Planar for around $150. 

I could only buy the lens at the time and, frankly, didn’t even know where to start when it came to C/Y bodies. I planned to adapt the lens to my Fuji mirrorless, which I was still using regularly to save on film costs, get images back immediately, and continue learning how to better control my settings (live view is a tremendous help). 

My early shots with the lens were massively satisfying. The images I produced were sharp, saturated, and featured the renowned 3D pop that people speak of when they speak about Zeiss glass. All was well in mid-January, but next steps still had to be taken. The lens needed a camera.

A Ghost Story of Cameras

The next step was to find a way to use my new Planar with film. So, I ended up buying a gnarly looking Yashica FX-3. This is not a Yashica FX series review, but for reference, the FX series Yashicas use the C/Y mount and are tiny, manual SLRs. Apart from a meter, the FX-3 has virtually no special features. Mine was ratty in looks and I never got batteries for the meter, but it did what I wanted it to, which was allow me to use my Planar on film. Best of all, I purchased it bundled with a Yashica 50mm f/2 lens for just $25 total. 

The Yashica netted me some nice photos, thanks to the lens, but ultimately it did not fit the bill for an altogether great camera. With Oxford on the horizon—a prime chance to memorialize my time meandering down cobblestone streets between English Gothic buildings with my close friends—I felt the urge to buy a genuine Contax camera. 

I began my trek into the annals of Contax camera history to find which one would fit the bill. I was looking for a camera that was affordable but powerful. The previous fall, I had purchased a Nikon F2, but it turned out to be far from my ideal. I was learning (and I’m now trying to embrace the fact) that I prefer having some modern features in my analog photography. The F2 is a beautiful beast. I know its heritage and acclaim. But for me, the Nikon and its DP-12 prism are too heavy and too manual to be totally enjoyable. 

In this moment, I realize that my review of the Contax 167MT is turning into a tale of cameras past, and might fittingly be called A Camera Carol. In Prose. Being a Ghost Story of Cameras. But these cameras were all for the benefit of my edification and now their ghosts are for yours. Through the misty vestiges of the F2 and the FX-3, there came into view the camera I needed: the Contax 167MT. 

Getting the Camera in Hand 

The 167MT and its incomprehensibly sub-100-dollar-pricetag called to me from eBay. I thought it’d be the best match for my waiting Carl Zeiss lens, and I now know that decision was the right one, because after shooting with the 167MT no other Contax body seems too enticing, despite the hours I’ve spent thinking about buying an RX, or the ST, or the RTSs. (And I know someone will tell me in the comments section that I haven’t really experienced the cream of the Contax crop until I’ve tried one of those, or maybe it will be the AX or the Aria, but trust me – the 167MT is no meager camera). 

Days before I left for England, the 167MT showed up at my doorstep and away we went. 

Looking back on the photos now, I’m instantly transported to those days. Revisiting these photos for this article stirs my longing even more strongly than it otherwise would, on account of the fact that COVID-19 has forced organizers to call off this year’s conference. Even now, at my desk, I imagine I’m there in the crisp March air with my Contax camera swinging around my neck as I try to keep up with my friends on our walks, pausing here and there to take a photo. 

I am there walking through the cloisters of Magdalen College with Mark, Doug, and Yoshi, us in our blazers with tobacco pipes gently smoldering. The best argument in favor of the 167MT is its ease of use relative to its capability. On our walks, I could quickly move between spot and center-weighted metering, and just as quickly flick between aperture-priority (Av), shutter-priority (Tv), and manual (M) exposure modes. There’s also three different full program modes – normal, low shutter speed, and high shutter speed. I also prefer an electronic film advance so I can shoot quickly, and the 167MT has that, too. 

Exposure Milestones 

The Contax 167MT is wicked fast, with a maximum shutter speed of 1/4000^th of a second. This means that shooting at wide apertures is possible even in bright light. Worth noting is that the 167MT was one of the first cameras ever to implement auto-exposure bracketing control, or ABC. ABC essentially takes one frame overexposed by 0.5, 1, or 1.5-stops depending on your settings, followed by a frame correctly exposed, followed by a frame underexposed by the same stop(s). In the single drive mode, you have to depress the shutter three times to cycle through one bracket, but in continuous drive the camera will take the three-shot bracket with one shutter click. For those unfamiliar with auto bracketing, the camera does not take multiple exposures on one frame but rather three different frames with different exposure values (EV) each. This helps ensure you’ll get the shot in tricky lighting. 

Importantly, the ABC feature is switched on with a rotating lever and switched off with the same lever. So, if you switch the lever to 0.5, the camera will continue taking three-shot brackets until you switch the lever back to 0. In most cases, this is probably a minor point, but it could make for unintentionally exposed shots if you forget to stop bracketing. 

The ABC lever is conveniently stacked under the exposure compensation dial which offers exposure compensations of +2 EV to -2 EV in 1/3^rd stops. Also quite convenient, the ABC feature works in tandem with the exposure compensation. So theoretically, if you knew you wanted to overexpose a composition but weren’t sure by exactly how much, you could set the compensation dial to +2 and the ABC lever to 1 and as a result you’d get a frame with EV +1, EV +2, and EV +3! Now you know you’ll have your ideal overexposure. 

This is a rather long digression on some exposure features which are now, in the digital age, rather commonplace. But in truth the 167MT’s ABC feature was groundbreaking in its day, and even now it’s not a common line item on the spec sheet of the most popular classic film cameras. As a photographer, I use exposure compensation fairly often and occasionally like the safety that bracketing provides—if I have a shot I know I want perfect, ABC gives me the peace of mind that I’ve got three chances to get it right with some systematicity. To my knowledge, only the RX, ST, Aria, and RTSIII Contax SLRs have ABC.

An additional exposure feature, the Contax 167MT offers auto-exposure lock (AEL). To my dismay, the AEL only works as a switch rather than a half-shutter freeze or separate button. This means that to lock in your exposure, you start with the spot meter, center your spot on your exposure reference, and then switch the exposure to AEL thereby preserving the spot meter reading until switched back. That this whole operation is connected to the off/on switch in a diagram of off makes the switching between settings a bit messier still. 

Exploring Oxford with the Contax 167MT 

Friedrich Nietzsche wrote in his 1882 book The Gay Science, “It is our custom to think in the open air, walking, leaping, climbing, or dancing on lonesome mountains by preference, or close to the sea, where even the paths become thoughtful. Our first question concerning the value of a [person] is: Can it walk?” And Ludwig Wittgenstein, one of the 20^th century’s greatest philosophers, famously suggested that philosophy is therapeutic. 

At Oxford, my friends and I combine the two in walking while philosophizing. Oxford is home to winding streets, austere courtyards, expansive meadows, and countless small places to feel cloistered from the world. The walk I prefer the most is one that’s a little over a mile and a half. 

You move off of High Street into the Porter’s Lodge of Magdalen College before exiting into St. John’s Quad, where there stands an ornate gate and a courtyard cobbled and tiled. At this point, you move into the College’s cloister from where you can see the Great Tower rising above through the corniced, stone windows. You make your away to Addison’s Walk which winds around the River Cherwell and Holywell Mill Stream. The Walk circumferences an expanse called the Water Meadow, and toward the far northeastern section of the walk you can move onto a new path that will take you to the Magdalen Fellows’ Garden. 

That path then finds its terminus in a clearing, holding a small pool and a bench of one halved log on two stone half-circles. We’ve spent hours sitting here, talking, pacing, and standing. And all the while, on this one particular trip, I had my 167MT in my hands or hanging at my chest. 

Handling is superb. Right away, my hands find the grips on the back and front of the camera. My thumb rests naturally in the back grip and my fingers curl around the cradle of the front grip. The back of the film door has aggressive striations to keep the camera locked in place, even with a casual grip.

This may seem insignificant to some, but the way a camera handles is extremely important to me. I don’t want something that hurts to hold or feels awkward. I also don’t want something over-engineered. And please spare me the sticky rubber which inevitably deteriorates in time; I’m thinking of my new Minolta a7, which I just had to thoroughly scrub with rubbing alcohol to remove the rubber entirely since it had become a gross, sticky mess. The 167MT’s ergonomics are ideal. The rubber is solid, clean, and just the right amount of grippy. The grips themselves provide rests for my fingers so that I hardly notice holding the camera while shooting. 

On my Oxford romps, the camera felt electrifying to use. Maybe it was the perfect spring day getting to me on the day I arrived in Oxford, but walking and shooting with the 167MT felt as natural in my hands as my boots did on my feet. 

Focusing is also a breeze. I’m notoriously less-than-flawless at nailing focus with SLRs. For some reason, I just can’t seem to tell when I’ve hit perfect focus. While I still miss here and there with the 167MT, that is purely due to my own failings. The stock focusing screen is bright and the viewfinder magnification is a respectable .82x with 95% image coverage. The screen also features a split-image circle surrounded by a microprism ring. Altogether, there are multiple aids for manual focusing. Thanks to these aids, I felt like I produced photo after photo on my visit that captured excellent focus. 

Sadly, for many, there are a great deal of pubs in Oxford that serve only English beers. As an American, I am inundated at every restaurant and bar—which seem like a distant memory by this point—with craft beers. Like anyone subject to peer pressure and capitalist propaganda, I myself have developed a preference for craft beers. Luckily, in the north of Oxford on St. Giles’ street, there exist a few pubs that offer a more international selection. The Lamb and Flag is one such pub. Aside from pretty well supplied taps, they also have fridges around the corner from the entryway bar that are stocked with innumerable Belgian beers. 

So, in the Lamb and Flag, around pints of Deliriums and Orvals, I need to shoot wide open at f/1.7 to compensate for the quintessential pubbish darkness. Even when shooting wide open, though, I still managed to nail focus where a friend’s eye closest to me is sharp while a half inch to the eye’s left and right begin to soften. It may have been luck, or it may have been the magnification, microprism, and split-image. 

The Contax 167MT is functionally high-class. I feel that it allows me to think for myself while shooting but provides me all the implements I need to do that. Even the thoughtfully designed viewfinder exposure readout is helpful. On the pentaprism hump, just above the iconic Contax logo, the camera has an elongated oval window which uses ambient light to illuminate the exposure settings and frame count in the viewfinder. However, when you half-depress the shutter button, the readout glows with a soft orange light, easy-to-read even in the dark. 

The camera is just dang cool. It’s tough, features the classic Contax edge and corner smoothing, and looks sexy in its black lustre. Even the blue LCD screen on the top is somehow better looking than any other top-plate LCD I’ve seen. While walking around with it, even I, an academic wearing a wool blazer and talking about some obscure philosophy terms with friends who look equally esoteric, can look cool. 

All Good Things

The camera is amazing, and I genuinely love it. But it’s imperfectly perfect. My main gripe with the camera is not that it doesn’t have a multiple-exposure capability (eye-roll emoji) or that it relies on an electronic shutter, but rather its control system. For a camera that is otherwise beautifully and effectively designed, the controls are far from ideal. 

Aperture, of course, is controlled on the C/Y lenses themselves and, as I mentioned, the exposure compensation gets its own dial. But unfortunately, the shutter, ISO, and exposure mode are controlled using some combination of a slide triggers and buttons. For the exposure mode and the ISO, you have to hold down either the ISO or MODE button and then flick through your options using a little slider on the other side of the camera. When in Av, Tv, or M modes, you’ll need to use that same slider to flip through shutter speeds, which can be confirmed on the LCD screen on the other side of the camera. 

This fiddling with a slider is not ideal and some simple changes could have been made to the camera controls that would have made it essentially perfect. It’s as simple as adding a dial designated for the shutter, with the drive mode stacked underneath it (identical to the exposure compensation and ABC control stack). After this, just make the exposure mode button work without the slider since there are only six exposure modes to flip through, and it wouldn’t be cumbersome to rotate through the whole list if need be.   

Is the Contax 167MT perfectly functional without a dedicated shutter dial? Sure, but it’s these small design shortcomings that keep the 167MT from being totally supreme. All in, the camera helped me preserve a single perfect week in a place where my spirit feels at home. For that week at least, it really was the camera I was looking for all along. 

Get your own Contax 167MT on eBay

Get one from our shop at F Stop Cameras

[Some of the links in this article will direct users to our affiliates at B&H Photo, Amazon, and eBay. By purchasing anything using these links, Casual Photophile may receive a small commission at no additional charge to you. This helps Casual Photophile produce the content we produce. Many thanks for your support.]